If you buy the AquaTru Classic + 2 year filter pack together, you will receive a free descaling set. AquaTru Classic is a complete water filtration system based on Ultra Reverse Osmosis® that removes up to 99% of all contaminants from tap water. AquaTru Classic is easy to install - Plug & Play - and is easy to use and maintain. The system has a capacity of 2.7 litres and is ideally suited for frequent use at home or in the office.
NOTE: A starter filter set is already included with the AquaTru Classic water filter. With this package, you have enough supplies to last for a total of 2.5 years.
Advantages of this combination package: AquaTru Classic + 2 years of filters + free descaling set This package contains the AquaTru Classic water filter including a starter filter set, and an extra filter set for 2 years with 4x pre-carbon filters, 2x VOC carbon filter and 1x reverse osmosis filter and a free descaling kit. After 6 months of use, the first filter of your AquaTru needs to be replaced. With the filter package for 2 years you have all the necessary filters for the following 2 years at your disposal (sufficient supplies for 2.5 years in total). With the help of the descaling package you can remove built-up limescale in your AquaTru, especially in areas with hard water. This is how you get the most out of your AquaTru.
Features and benefits of AquaTru Classic AquaTru Classic uses a 4-stage reverse osmosis water filtration system. The system is extremely user-friendly. After installing the filters and plugging in, simply fill the rear water tank with tap water and the system will immediately start filtering. Within 12 to 15 minutes, the front water tank contains 2.7 litres of filtered water. Subsequently, press the blue dispenser button at the front of the device and hold your glass underneath to enjoy freshly purified water. The water tank with filtered water is removable and can be placed in the refrigerator. This tank has dimensions of 19.69 cm in height, 14.61 cm in width and 24.45 cm in depth. AquaTru Classic is made of durable Tritan® plastic and is free of bisphenol A. Tritan plastic does not leak microplastics into the drinking water.
Purification process The use of AquaTru Classic, the water filtration system based on reverse osmosis, is very easy. Fill the rear tank with tap water and your water filter will do the rest. AquaTru Classic uses an advanced multi-stage purification process with a sediment filter, a pre-carbon filter, a reverse osmosis membrane and a post-carbon filter. Together, these four filters ensure that contaminants such as chlorine, lead, arsenic, fluoride and more are removed from the water. The result is pure, clean and delicious drinking water. The whole filtering process only takes a few minutes. You can also use the purified water for hot drinks or for cooking.
Product specifications AquaTru Classic
Total unit dimensions: 35.56 cm (H) x 30.48 cm (W) x 35.56 cm (D)
Filtered water tank dimensions: 19.69 cm (H) x 14.61 cm (W) x 24.45 cm (D)
Tap water tank dimensions: 19.69 cm (H) x 20.75 cm (W) x 24.45 cm (D)
AquaTru Classic has a 4-stage water filtration based on reverse osmosis. The system is easy to use. After installing the filters and plugging them in, fill the rear water tank with tap water and the system will immediately start filtering. Within 12 to 15 minutes, the front water tank contains 2.7 litres of pure water. Subsequently press the blue dispenser button at the front of the unit and hold your glass underneath for freshly purified water. The water tank with filtered water is removable and can be put in the refrigerator. This tank is 19.69 cm high, 14.61 cm wide and 24.45 cm deep. AquaTru Classic is made of durable Tritan® plastic and is free of bisphenol A. Tritan plastic is also known for not leaking microplastics into the drinking water.
AquaTru Classic filters tap water based on reverse osmosis. Fill the rear tank with tap water and the system does the rest. AquaTru Classic uses a multi-stage purification process, including a sediment filter, a pre-carbon filter, a reverse osmosis membrane and a post-carbon filter. Together, these filters remove contaminants from water such as chlorine, lead, arsenic, fluoride and more. The result is pure, clean and delicious water. The filtering process takes 12-15 minutes. You can also use the purified water for hot drinks or for cooking.
